gf2:projekte:minecraft:2d1gruppe6 [DokuWiki CSC]

Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt.
{{ :gf2:projekte:minecraft:zoo_informatik.mcworld |}}**ZOO**

Wir wollen zusammen einen Zoo, evt. mit Aquarium, bauen und haben dafür zuerst einige Gehege programmiert:

kleines Gehege:
<code python>
def kleines_Gehege(x,y,z):
    blocks.fill(SPRUCE_FENCE, world(x, y, z), world(x+19, y+1, z+19), FillOperation.HOLLOW)
    blocks.fill(AIR, world(x+1, y, z+1), world(x+18, y+2, z+18), FillOperation.REPLACE)

kleines_Gehege(x,y,z) #selber einsetzen
</code>

Wir haben uns für eine flache Welt entschieden, weil es so am einfachsten ist, den Zoo zu bauen.



Aquarium:
<code python>
def Aquarium(x,y,z):
    blocks.fill(GLASS, world(x, y-1, z), world(x+14, y+10, z+20), FillOperation.HOLLOW)
    blocks.fill(GRASS, world(x, y-1, z), world(x+14, y-1, z+20), FillOperation.REPLACE)
    blocks.fill(SAND, world(x+1, y-1, z+1), world(x+13, y-1, z+19), FillOperation.REPLACE)
    blocks.fill(WATER, world(x+1, y+1, z+1), world(x+13, y+9, z+19), FillOperation.REPLACE)

Aquarium(72,-60,99)
</code>

**__Tiere:__**
  * **Schweine:**im Streichelzoo (eingezäuntes Gehege mit Sicherheitstor(zwei Türen nach einander, damit Tiere nicht raus können))
  * **Esel:** im Streichelzoo (mit Unterkünften für die Tiere)
  * **Lamas:**im Streichelzoo
  * **Pferd:**im Streichelzoo
  * **Kuh:**im Streichelzoo
  * **Schafe:**im Streichelzoo
  * **Ziegen:**hohes Gehege aus Glas(vllt Berg)
  * **Fledermaus:**dunkle Höhle, man kann durchlaufen
  * **Meeresschildkröte:**Sandbank und Wasserbecken, 
  * **Fische&Delfine:**in ein Aquarium aus Glas, geht auch unterirdisch, mit Durchgang zum Anschauen
  * **Tintenfische(2Arten)&Quallen:** separates Aquarium 
  * **Papageie:** kleintier Streichelzoo?, ganz zu gehege
  * **Hase, Huhn:** kleintier Streichelzoo, doppel Tor, überdachte Unterkunft
  * **Pandas:**Bambuslandschaft
  * **Fuchs:**Gehege mit Bäumen und unterirdischen Bau
  * **Wolf:**grosses Gehege mitBäumen und Höhle
  * **Eisbär:**Schneegebiet mit Wasserbecken
  * **Ocelot:** mit Bäumen, dunkel
  * **Strider:**Gehege mit Lava und Dach, wegen Regen (sonst stirbt)

Für unseren Zoo brauchen wir natürlich auch noch einen Weg und einen Eingang:

Als "Special Effect" haben wir uns gedacht, wir könnten Laternen bauen, die angehen, wenn man auf eine "Pressure Plate" tritt:
<code python>
def lampe2(x, y, z): #Der Punkt ist dort, wo die Lampe ist, man schaut NICHT auf die PressurePlate
    blocks.place(STONE, world(x, y-1, z))
    blocks.place(REDSTONE_LAMP, world(x, y, z))
    blocks.place(REDSTONE_WIRE, world(x+1, y-1, z))
    blocks.fill(REDSTONE_WIRE,world(x+2, y-2, z), world(x+4, y-2, z), FillOperation.REPLACE)
    blocks.place(STONE_PRESSURE_PLATE, world(x+4, y, z))
    blocks.place(AIR, world(x+2, y-1, z))
 
lampe2(x,y,z)

</code>

runder Tunnel:
<code python>
def tunnel():
    agent.move(FORWARD, 10)
    agent.turn(LEFT)
    agent.turn(LEFT)
    agent.move(FORWARD, 10)
    for i in range(2):
        agent.move(UP, 1)
        agent.move(LEFT, 1)
        agent.turn(LEFT)
        agent.turn(LEFT)
        agent.move(FORWARD, 10)
        agent.move(UP, 1)
        agent.move(RIGHT,1)
        agent.turn(LEFT)
        agent.turn(LEFT)
        agent.move(FORWARD, 10)
    agent.move(LEFT, 1)
    agent.turn(LEFT)
    agent.turn(LEFT)
    agent.move(FORWARD, 10)
    for i in range(2):
        agent.move(DOWN, 1)
        agent.move(RIGHT, 1)
        agent.turn(LEFT)
        agent.turn(LEFT)
        agent.move(FORWARD, 10)
        agent.move(DOWN, 1)
        agent.move(LEFT,1)
        agent.turn(LEFT)
        agent.turn(LEFT)
        agent.move(FORWARD, 10)
       
tunnel()
</code>
Aquarium mit Tunnel: (Korallen & Tiere selber einfügen)
<code python>
def TunnelAquarium(X,Y,Z):
    blocks.fill(GLASS, world(X, Y, Z), world(X+25, Y+25, Z+25), FillOperation.HOLLOW)
    blocks.fill(WATER, world(X+1, Y+1, Z+1), world(X+24, Y+23, Z+24), FillOperation.REPLACE)
    blocks.fill(GLASS, world(X+10, Y-1, Z), world(X+15, Y+5, Z+25), FillOperation.HOLLOW)
    blocks.fill(SAND, world(X+1,Y-1,Z+1), world(X+24,Y-1,Z+24), FillOperation.REPLACE)
    blocks.fill(GLOWSTONE, world(X+10,Y-1,Z), world(X+15,Y-1,Z+25), FillOperation.REPLACE)
    blocks.fill(AIR, world(X+11,Y,Z-1), world(X+14,Y+4,Z+25), FillOperation.REPLACE)

</code>

Eisbärgehege:
<color #22b14c>Hier um die Treppen zu drehen: siehe[[gf2:projekte:minecraft:tipps_bauen|A. Tipps und Informationen zum automatisierten Bauen]]</color>
<code python>
def unterirdisch(x,y,z):
    blocks.fill(STONE_BRICKS,world(x+1,y-1,z+1),world(x-11,y-4,z-5),FillOperation.HOLLOW)
    blocks.fill(AIR,world(x-1,y-1,z),world(x-3,y-1,z-1),FillOperation.REPLACE)
    blocks.fill(AIR,world(x-9,y-1,z),world(x-7,y-1,z-1),FillOperation.REPLACE)
    blocks.place(TORCH,world(x-7,y-2,z+1))
    blocks.place(TORCH,world(x-3,y-2,z+1))

    for i in range(3):
        blocks.place(blocks.block_with_data(BRICK_STAIRS, -1), world(x-i, y-1-i, z-1))
        blocks.place(blocks.block_with_data(BRICK_STAIRS, -1), world(x-i, y-1-i, z))
        blocks.place(blocks.block_with_data(BRICK_STAIRS, 1), world(x-10+i, y-1-i, z))
        blocks.place(blocks.block_with_data(BRICK_STAIRS, 1), world(x-10+i, y-1-i, z-1))
       
def Wasserbecken(x,y,z):
    blocks.fill(GLASS,world(x-10,y-4,z-5),world(x,y-1,z-10),FillOperation.HOLLOW)
    blocks.fill(AIR,world(x-9,y-1,z-6),world(x-1,y-1,z-9),FillOperation.REPLACE)
    blocks.fill(WATER,world(x-9,y-3,z-6),world(x-1,y-1,z-9),FillOperation.REPLACE)

def Zaun(x,y,z):
    blocks.fill(OAK_FENCE,world(x-10,y,z-5),world(x,y,z-16),FillOperation.HOLLOW)
    blocks.fill(AIR,world(x-9,y,z-6),world(x-1,y,z-15),FillOperation.HOLLOW)

def Boden(x,y,z):
    blocks.fill(SNOW, world(x-9,y-1,z-10),world(x-1,y-3,z-15),FillOperation.REPLACE)

def Eisbärgehege(x,y,z):
    unterirdisch(x,y,z)
    Wasserbecken(x,y,z)
    Zaun(x,y,z)
    Boden(x,y,z)

Eisbärgehege(x,y,z) #der Punkt ist auf der 1.rechten Treppe, zur Durchführung schauend 


</code>

Für den Streichelzoo brauchen wir ein Gehege mit zwei Türen, damit die Tiere nicht entfliehen können.
<code python>
def Streichelzoo(x,y,z):
    blocks.fill(GLASS, world(x,y,z), world(x+25, y+2, z+25), FillOperation.HOLLOW)
    blocks.fill(AIR, world(x+1,y,z+1), world(x+24, y+2, z+24), FillOperation.REPLACE)
    blocks.fill(GLASS, world(x+25,y,z+14), world(x+23, y+2, z+16), FillOperation.HOLLOW)
    blocks.fill(AIR, world(x+25,y,z+15), world(x+23, y+1, z+15), FillOperation.REPLACE)
    blocks.place(IRON_DOOR, world(x+26, y, z+15))
    blocks.place(STONE_PRESSURE_PLATE, world(x+27, y, z+15))
    blocks.place(STONE_PRESSURE_PLATE, world(x+25, y, z+15))
    blocks.place(IRON_DOOR, world(x+24, y, z+15))
    blocks.fill(GRASS, world(x+10, y, z+12), world(x+15, y, z+17))
    blocks.fill(GRASS, world(x+11, y+1, z+13), world(x+14, y+1, z+15))
    blocks.fill(GRASS, world(x+5, y, z+2), world(x+9, y, z+9))


Streichelzoo(x,y,z)
</code>

Papagei Gehege: selber Bäume wachsen lassen
<code Python>
def papagei_gehege(X,Y,Z):
    blocks.fill(GLASS, world(X, Y, Z), world(X+25, Y+25, Z+25), FillOperation.HOLLOW)
    blocks.fill(AIR, world(X+1, Y+1, Z+1), world(X+24, Y+23, Z+24), FillOperation.REPLACE)

papageien_gehege(X,Y,Z)
    
</code>
Panda Gehege: selber Bambus reinsetzen
<code python>
    
def panda_gehege(X,Y,Z):
    blocks.fill(OAK_FENCE, world(X, Y, Z), world(X+25, Y+2, Z+25), FillOperation.HOLLOW)
    blocks.fill(AIR, world(X+1, Y, Z+1), world(X+24, Y+2, Z+24), FillOperation.REPLACE)
    
panda_gehege(X,Y,Z) #beliebig einsetzen
</code>

Wir wollen auf noch eine Federmaushöhle bauen. Dafür haben wir einen grossen, dunklen Raum gebaut, mit zweimal zwei Türen. Für Beleuchtung vllt Laternen in die Eingänge setzen(per Hand) 
<code python>
def fledermaushoehle(x, y, z): #Der Punkt ist unten(bei der Tür) rechts.
    blocks.fill(BLACKSTONE, world(x, y, z), world(x-50, y+3, z-20)) #Zuerst bauen wir die Hoele (50*20)
    blocks.fill(AIR, world(x-1, y, z-1), world(x-49, y+3, z-19))
    blocks.fill(BLACKSTONE, world(x-1, y+4, z-1), world(x-49, y+5, z-19))
    blocks.fill(AIR, world(x-2, y+4, z-2), world(x-48, y+5, z-18))
    blocks.fill(BLACKSTONE, world(x-2, y+6, z-2), world(x-48, y+7, z-18))
    blocks.fill(AIR, world(x-3, y+6, z-3), world(x-47, y+7, z-17))
    blocks.fill(BLACKSTONE, world(x-3, y+8, z-3), world(x-47, y+8, z-17))
    blocks.fill(BLACKSTONE, world(x-3, y, z-1), world(x-5, y+2, z-3)) #Dann bauen wir die zwei Tueren
    blocks.fill(AIR, world(x-4, y, z), world(x-4, y+1, z-3))
    blocks.fill(BLACKSTONE, world(x-49, y, z), world(x-48, y+2, z-3))
    blocks.fill(AIR, world(x-49, y, z), world(x-49, y+1, z-3))
    blocks.fill(BLACKSTONE, world(x-4, y-1,z), world(x-4, y-1, z-10)) #Am Schluss bauen wir noch den Weg
    blocks.fill(BLACKSTONE, world(x-49, y-1, z), world(x-49, y-1, z-10))
    blocks.fill(BLACKSTONE, world(x-49, y-1, z-11), world(x-4, y-1, z-11))
fledermaushoehle(x,y,z) #hier beliebig x,y,z einsetzen
</code>


Für die Ziegen brauchen wir ein Gehege, das oben geschlossen ist, weil Ziegen sehr hoch springen können. Auch haben wir einen kleinen Hügel in das Gehege hinein programmiert.

<code python>
def ziegengehege(x, y, z): #Der Punkt ist unten rechts.
    blocks.fill(GLASS, world(x, y, z), world(x+20, y+5, z+20))
    blocks.fill(AIR, world(x+1, y, z+1), world(x+19, y+4, z+19))
    blocks.fill(GRASS, world(x+5, y, z+5), world(x+12, y, z+10))
    blocks.fill(GRASS, world(x+6, y+1, z+6), world(x+10, y+1, z+9))
    
ziegengehege(x,y,z) 
</code>

Für special effect (Bienen spawnen, wo man läuft)
<code python>
def on_travelled_walk():
    x = player.position().get_value(Axis.X)
    y = player.position().get_value(Axis.Y)
    z = player.position().get_value(Axis.Z)
     
    player.say("x:"+str(x)+" y:"+str(y)+" z:"+str(z))
 
    if (-20<x<20) and (y==-60) and (z==4): #für 1. und 3. Klammer, Koordinaten vom ganzen Zoo eingeben
        mobs.spawn(BEE, pos(0, 0, 0))
    
player.on_travelled(WALK, on_travelled_walk)
</code>

Eingang:
<code python>
def Eingang(x,y,z): #der Punkt ist unten rechts
    blocks.fill(PURPUR_BLOCK, world(x, y-1, z), world(x+25, y+4, z+5), FillOperation.HOLLOW)
    blocks.fill(STRIPPED_OAK_WOOD, world(x, y-1, z), world(x+25, y-1, z+5), FillOperation.REPLACE)
    blocks.fill(AIR, world(x, y, z+2), world(x, y+1, z+3), FillOperation.REPLACE)
    blocks.fill(AIR, world(x+25, y, z+2), world(x+25, y+1, z+3), FillOperation.REPLACE)
    blocks.fill(AIR, world(x+11, y, z+5), world(x+13, y+1, z+5), FillOperation.REPLACE) #Haupteingang
    blocks.place(AIR, world(x+12, y+2, z+5))
    
</code>

Hier ist unsere fertige Welt:
<code python>
def Eingang(x,y,z): #selber Schilder und Seelenfackeln
    blocks.fill(PURPUR_BLOCK, world(x, y-1, z), world(x+25, y+4, z+5), FillOperation.HOLLOW)
    blocks.fill(STRIPPED_OAK_WOOD, world(x, y-1, z), world(x+25, y-1, z+5), FillOperation.REPLACE)
    blocks.fill(AIR, world(x, y, z+2), world(x, y+1, z+3), FillOperation.REPLACE)
    blocks.fill(AIR, world(x+25, y, z+2), world(x+25, y+1, z+3), FillOperation.REPLACE)
    blocks.fill(AIR, world(x+11, y, z+5), world(x+13, y+1, z+5), FillOperation.REPLACE) #Haupteingang
    blocks.place(AIR, world(x+12, y+2, z+5))
 
def panda_gehege(X,Y,Z): #selber Bambus
    blocks.fill(OAK_FENCE, world(X, Y, Z), world(X+25, Y+2, Z+25), FillOperation.HOLLOW)
    blocks.fill(AIR, world(X+1, Y, Z+1), world(X+24, Y+2, Z+24), FillOperation.REPLACE)
 
def Streichelzoo(x,y,z): #selber Knopf für Tür & bonemeal
    blocks.fill(GLASS, world(x,y,z), world(x+25, y+2, z+25), FillOperation.HOLLOW)
    blocks.fill(AIR, world(x+1,y,z+1), world(x+24, y+2, z+24), FillOperation.REPLACE)
    blocks.fill(GLASS, world(x+25,y,z+14), world(x+23, y+2, z+16), FillOperation.HOLLOW)
    blocks.fill(AIR, world(x+25,y,z+15), world(x+23, y+1, z+15), FillOperation.REPLACE)
    blocks.place(IRON_DOOR, world(x+26, y, z+15))
    blocks.place(STONE_PRESSURE_PLATE, world(x+27, y, z+15))
    blocks.place(STONE_PRESSURE_PLATE, world(x+25, y, z+15))
    blocks.place(IRON_DOOR, world(x+24, y, z+15))
    blocks.fill(GRASS, world(x+10, y, z+12), world(x+15, y, z+17))
    blocks.fill(GRASS, world(x+11, y+1, z+13), world(x+14, y+1, z+15))
    blocks.fill(GRASS, world(x+5, y, z+2), world(x+9, y, z+9))
 
def papagei_gehege(X,Y,Z): #selber Türen & Knopf & Bäume & bonemeal
     blocks.fill(GLASS, world(X, Y, Z), world(X+25, Y+25, Z+25), FillOperation.HOLLOW)
     blocks.fill(AIR, world(X+1, Y, Z+1), world(X+24, Y+24, Z+24), FillOperation.REPLACE)
     blocks.fill(GLASS, world(X+11,Y,Z+24), world(X+13, Y+2, Z+20), FillOperation.HOLLOW)
     blocks.fill(AIR, world(X+12, Y, Z+25), world(X+12, Y+1, Z+20))
     blocks.place(STONE_PRESSURE_PLATE, world(X+12, Y, Z+26))
     blocks.place(STONE_PRESSURE_PLATE, world(X+12, Y, Z+24))
     blocks.fill(GLASS, world(X+11,Y,Z+1), world(X+13, Y+2, Z+3), FillOperation.HOLLOW)
     blocks.fill(AIR, world(X+12, Y, Z), world(X+12, Y+1, Z+3))
     blocks.place(STONE_PRESSURE_PLATE, world(X+12, Y, Z-1))
     blocks.place(STONE_PRESSURE_PLATE, world(X+12, Y, Z+1))
 
def Wolf_Ocelot(x,y,z): #selber Bäume & bonemeal
    blocks.fill(SPRUCE_FENCE, world(x, y, z), world(x+14, y, z+20), FillOperation.HOLLOW)
    blocks.fill(AIR, world(x+1, y, z+1), world(x+13, y, z+19), FillOperation.REPLACE)
 
def ziegengehege(x, y, z): #selber bonemeal
    blocks.fill(GLASS, world(x, y, z), world(x+14, y+5, z+20))
    blocks.fill(AIR, world(x+1, y, z+1), world(x+13, y+4, z+19))
    blocks.fill(GRASS, world(x+5, y, z+5), world(x+12, y, z+10))
    blocks.fill(GRASS, world(x+6, y+1, z+6), world(x+10, y+1, z+9))
 
def Tintenfisch(x,y,z): #selber Tiere & Korallen
    blocks.fill(GLASS, world(x, y-1, z), world(x+14, y+10, z+20), FillOperation.HOLLOW)
    blocks.fill(GRASS, world(x, y-1, z), world(x+14, y-1, z+20), FillOperation.REPLACE)
    blocks.fill(SAND, world(x+1, y-1, z+1), world(x+13, y-1, z+19), FillOperation.REPLACE)
    blocks.fill(WATER, world(x+1, y+1, z+1), world(x+13, y+9, z+19), FillOperation.REPLACE)
 
def Schildkrötenfisch(x,y,z): #selber Tiere, Korallen, Schilder
    blocks.fill(GLASS, world(x, y-1, z), world(x+14, y+10, z+20), FillOperation.HOLLOW)
    blocks.fill(GRASS, world(x, y-1, z), world(x+14, y-1, z+20), FillOperation.REPLACE)
    blocks.fill(SAND, world(x+1, y-1, z+1), world(x+13, y-1, z+19), FillOperation.REPLACE)
    blocks.fill(WATER, world(x+1, y+1, z+1), world(x+13, y+9, z+19), FillOperation.REPLACE)
 
def TunnelAquarium(X,Y,Z): #selber Tiere & Korallen
    blocks.fill(GLASS, world(X, Y, Z), world(X+25, Y+25, Z+25), FillOperation.HOLLOW)
    blocks.fill(WATER, world(X+1, Y+1, Z+1), world(X+24, Y+23, Z+24), FillOperation.REPLACE)
    blocks.fill(GLASS, world(X+10, Y-1, Z), world(X+15, Y+5, Z+25), FillOperation.HOLLOW)
    blocks.fill(SAND, world(X+1,Y-1,Z+1), world(X+24,Y-1,Z+24), FillOperation.REPLACE)
    blocks.fill(GLOWSTONE, world(X+10,Y-1,Z), world(X+15,Y-1,Z+25), FillOperation.REPLACE)
    blocks.fill(AIR, world(X+11,Y,Z-1), world(X+14,Y+4,Z+25), FillOperation.REPLACE)

def fledermaushoehle(x, y, z): #Der Punkt ist unten(bei der Tür) rechts.
    blocks.fill(BLACKSTONE, world(x, y, z), world(x-50, y+3, z-20)) #Zuerst bauen wir die Hoele (50*20)
    blocks.fill(AIR, world(x-1, y, z-1), world(x-49, y+3, z-19))
    blocks.fill(BLACKSTONE, world(x-1, y+4, z-1), world(x-49, y+5, z-19))
    blocks.fill(AIR, world(x-2, y+4, z-2), world(x-48, y+5, z-18))
    blocks.fill(BLACKSTONE, world(x-2, y+6, z-2), world(x-48, y+7, z-18))
    blocks.fill(AIR, world(x-3, y+6, z-3), world(x-47, y+7, z-17))
    blocks.fill(BLACKSTONE, world(x-3, y+8, z-3), world(x-47, y+8, z-17))
    blocks.fill(BLACKSTONE, world(x-3, y, z-1), world(x-5, y+2, z-3)) #Dann bauen wir die zwei Tueren
    blocks.fill(AIR, world(x-4, y, z), world(x-4, y+1, z-3))
    blocks.fill(BLACKSTONE, world(x-49, y, z), world(x-48, y+2, z-3))
    blocks.fill(AIR, world(x-49, y, z), world(x-49, y+1, z-3))
    blocks.fill(BLACKSTONE, world(x-4, y-1,z), world(x-4, y-1, z-10)) #Am Schluss bauen wir noch den Weg
    blocks.fill(BLACKSTONE, world(x-49, y-1, z), world(x-49, y-1, z-10))
    blocks.fill(BLACKSTONE, world(x-49, y-1, z-11), world(x-4, y-1, z-11))

def unterirdisch(x,y,z):
    blocks.fill(STONE_BRICKS,world(x+1,y-1,z+1),world(x-11,y-4,z-5),FillOperation.HOLLOW)
    blocks.fill(AIR,world(x-1,y-1,z),world(x-3,y-1,z-1),FillOperation.REPLACE)
    blocks.fill(AIR,world(x-9,y-1,z),world(x-7,y-1,z-1),FillOperation.REPLACE)
    blocks.place(TORCH,world(x-7,y-2,z+1))
    blocks.place(TORCH,world(x-3,y-2,z+1))
 
    for i in range(3):
        blocks.place(blocks.block_with_data(BRICK_STAIRS, -1), world(x-i, y-1-i, z-1))
        blocks.place(blocks.block_with_data(BRICK_STAIRS, -1), world(x-i, y-1-i, z))
        blocks.place(blocks.block_with_data(BRICK_STAIRS, 1), world(x-10+i, y-1-i, z))
        blocks.place(blocks.block_with_data(BRICK_STAIRS, 1), world(x-10+i, y-1-i, z-1))
 
def Wasserbecken(x,y,z):
    blocks.fill(GLASS,world(x-10,y-4,z-5),world(x,y-1,z-10),FillOperation.HOLLOW)
    blocks.fill(AIR,world(x-9,y-1,z-6),world(x-1,y-1,z-9),FillOperation.REPLACE)
    blocks.fill(WATER,world(x-9,y-3,z-6),world(x-1,y-1,z-9),FillOperation.REPLACE)
 
def Zaun(x,y,z):
    blocks.fill(OAK_FENCE,world(x-10,y,z-5),world(x,y,z-16),FillOperation.HOLLOW)
    blocks.fill(AIR,world(x-9,y,z-6),world(x-1,y,z-15),FillOperation.HOLLOW)
 
def Boden(x,y,z):
    blocks.fill(SNOW, world(x-9,y-1,z-10),world(x-1,y-3,z-15),FillOperation.REPLACE)
 
def Eisbärgehege(x,y,z):
    unterirdisch(x,y,z)
    Wasserbecken(x,y,z)
    Zaun(x,y,z)
    Boden(x,y,z)
 
def Zoo():
    TunnelAquarium(-31,-60,-87)
    Schildkrötenfisch(-36,-60,-56)
    Tintenfisch(-16, -60, -56)
    ziegengehege(45,-60,-57)
    Wolf_Ocelot(25,-60,-57)
    papagei_gehege(29,-60,-87)
    Streichelzoo(14,-60,-31)
    panda_gehege(-16,-60,-30)
    Eingang(0,-60,0)
    fledermaushoehle(45,-60,-100)
    Eisbärgehege(-9,-60,-94)
    blocks.fill(STONE, world(-1, -61, 3), world(-20, -61, 2), FillOperation.REPLACE)
    blocks.fill(STONE, world(-20, -61, 2), world(-18, -61, -61), FillOperation.REPLACE)
    blocks.fill(STONE, world(-20, -61, -88), world(-19, -61, -92), FillOperation.REPLACE)
    blocks.fill(STONE, world(-7, -61, -94), world(-4, -61, -95), FillOperation.REPLACE)
    blocks.fill(STONE, world(-4, -61, -96), world(-4, -61, -99), FillOperation.REPLACE)
    blocks.fill(STONE, world(41, -61, -99), world(41, -61, -62), FillOperation.REPLACE)
    blocks.fill(STONE, world(42, -61, -61), world(40, -61, 3), FillOperation.REPLACE)
    blocks.fill(STONE, world(39, -61, 3), world(26, -61, 2), FillOperation.REPLACE)
    def on_travelled_walk():
    x = player.position().get_value(Axis.X)
    y = player.position().get_value(Axis.Y)
    z = player.position().get_value(Axis.Z)
 
    player.say("x:"+str(x)+" y:"+str(y)+" z:"+str(z))
 
    if (-20<x<20) and (y==-60) and (z==4): #für 1. und 3. Klammer, Koordinaten vom ganzen Zoo eingeben
        mobs.spawn(BEE, pos(0, 0, 0))
 
player.on_travelled(WALK, on_travelled_walk)
Zoo()

</code>